Loading...
Newsletter

×
Treatment solutions for infectious risk waste Linkedin

STERIPLUS™ 80

Integrated infectious waste pre-shredding and steam sterilization system

Tesalys STERIPLUS ™ systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED ™ shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at heart.

STERIPLUS ™ 80
On-site infectious risk waste treatment solution

Fully automated

The STERIPLUS™ 80 is an easy-to-use, on-site processing solution.

Large capacity

The loading chamber has a capacity of 80 litres, i.e. 1 TESABOX 80 or 2 TESABOX 40 or 4 TESABOX 20.

Fully integrated system

The STERIPLUS™ 80 is a fully automated solution for pre-grinding and steam sterilization of infectious wastes.

LOADING CHAMBER CAPACITY 80 L
LOADING CHAMBER USEFUL DIMENSIONS (W x D x H) 370 x 360 x 628 mm
LOADING CAPACITY (containers) 1 X TESABOX 80 or 2 X TESABOX 40 or 4 X TESABOX 20
TOTAL CYCLE TIME (NF X30-503-1 standard) (1) 30 to 35 min
TOTAL CYCLE TIME in working conditions (2) 30 to 50 min.
LOADING CAPACITY (KG/CYCLE) 6,4 to 9,6 kg/cycle - Based on an average waste density of 0,08 to 0,12kg/L for HealthCare Waste 9,6 to 16 kg/cycle- Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid
TREATMENT CAPACITY (KG/H) (3) 8 to 12 kg/h - Based on an average waste density of 0,08 to 0,12kg/L for HealthCare Waste 12 to 20 kg/h - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid
MAX QUANTITY OF LIQUID RECOMMENDED PER CYCLE (4) 24 L
EXTERNAL DIMENSIONS (w x d x h) 1550 x 1200 x 1800 mm
NET WEIGHT 1300 kg 
LOADING CHAMBER Stainless steel with PTFE coating
TREATMENT CHAMBER AISI 304L stainless steel
STEAM GENERATOR AISI 304L stainless steel (chamber) & Highly corrosion-resistant Hastelloy®
WATER SOFTENER Built-in
WATER BOOSTER PUMP AND AIR COMPRESSOR Built-in
WASTER SHREDDER Structure: AISI 304L stainless steel & Blades: High-strength steel
PIPING Stainless steel/PTFE flexible hosing
CHASSIS Painted steel
BODYWORK Composite material / Painted steel
CYCLE TRACEABILITY - THROUGH PRINTOUT Built-in
USB PORT Built-in
 

(1) 30-35min for test loads as per NF X30-503-1 standard. (2) Cycle times may vary based on the type of materials, waste density, humidity, quantity of liquids, etc. For loads with high liquid content, cycle time can be longer. Up to 50min depending on the waste density. (3) Based on an average cycle time of 45min. (40 min. of cycle + 5 min. unloading/loading time). (4) Quantity of liquids allowed might vary depending on application (urine bags, blood bags, food testing bags, ...).

All the data given in this catalogue are non-binding and given as a guide only. Treatment capacities, cycle times and consumptions are given as mere examples and may vary depending on the type of waste, installation conditions, operator’s availability and skills. Consumption is calculated on the basis of a standard cycle of the machine. For consumption with cooling of the drain and / or the Virus + kit, please consult us.

WATER
Requirements Softened water (4-8°TH)
Consumption 15 liters / cycle
ELECTRICITY
Requirements 380-400 V III N, 50Hz/60Hz, 20 kW
Consumption 3 kWh/cycle
DRAIN ø 32 mm  internal (heat-resistant) 
STEAM/COMPRESSED AIR Produced by the integrated steam generator and air compressor; no external connection required.
STERIPLUSTM, TESASHREDTM and TESAXTRACTTM are Tesalys brands names.