STERISHRED® 250 is a modern compact on-site solution for treating infectious healthcare waste using a non-burn thermal process (steam sterilization) at 135°C. It simultaneously shreds and sterilizes biohazardous waste including sharps in minutes!
Its loading method facilitates the processing of medical waste in bags.
With an ergonomic interface, this solution offers a simple alternative to the treatment of waste with infectious risks.
STERISHRED® 250 allows to treat 15 to 25KG of infectious waste, in 40 to 50 min.
| LOADING CHAMBER CAPACITY |
170 L |
| DRAIN |
Inner 32 mm Ø (heat resistant, floor level) |
| STEAM |
Produced by the integrated steam generator, no external connection required |
|
COMPRESSED AIR |
Air compressor built-in |
|
TOTAL CYCLE TIME |
Approx. 30 to 35 min depending on steam generator version and load humidity |
|
LOADING CAPACITY (KG/CYCLE) |
10 to 25 kg/cycle (Based on an average waste density of 0,12 to 0,2 kg/l) |
|
TOTAL CYCLE TIME IN WORKING CONDITIONS (2) |
30 to 50 min |
|
TREATMENT CAPACITY (KG/H) (3) |
14 to 35 kg/h (Based on an average waste density of 0,12 to 0,2 kg/l) |
|
EXTERNAL DIMENSIONS (HxWxD) |
1918 mm (2765 incl. pusher) x 1900 mm x 1209 mm |
|
NET WEIGHT |
1 750 kg |
|
LOADING CHAMBER |
Stainless steel |
|
TREATMENT CHAMBER |
316L Stainless steel |
|
STEAM GENERATOR |
Stainless steel |
|
WATER SOFTENER |
Available as option (External) |
|
WATER BOOSTER PUMP |
Available as option (External) |
|
WASTE SHREDDER |
AISI 304L stainless steel (structure) Hardox® hard steel (blades) |
|
PIPING |
Stainless steel/PTFE flexible hosing |
|
CHASSIS |
Powder coated steel |
|
BODYWORK |
Stainless steel |
|
CYCLE TRACEABILITY |
Built-in printer |
| WATER | |
| Requirements | Softened water 4-8°TH |
| Consumption | Approx. 40 liters/cycle (15L machine + 25L steam generator) |
| ELECTRICITY | |
| Requirements | 380-400 V III N, 50/60 Hz, 40 Kw |
| Consumption | 5 Kwh/cycle |
