Loading...
Newsletter

×
Treatment solutions for infectious risk waste Linkedin

STERIPLUS™ 40

INTEGRATED INFECTIOUS WASTE PRE-SHREDDING AND STEAM STERILIZATION SYSTEM

Tesalys STERIPLUS ™ systems are the ideal solution to safely inactivate your infectious waste on site. Their integrated TESASHRED ™ shredding system not only allows a consequent reduction in the volume and weight of waste, but also guarantees their treatment at heart.

STERIPLUS ™ 40
On-site infectious risk waste treatment solution

Easy handling

The STERIPLUS™ 40 has a very ergonomic design, for easy handling and use, within everyone's reach.

Quick installation

It is easy to install and can be quickly deployed on site.

Efficient and fast

The STERIPLUS™ 40 enables rapid on-site processing, with cycles of 30 to 50 minutes, eliminating storage issues.

LOADING CHAMBER CAPACITY 40 L
LOADING CHAMBER USEFUL DIMENSIONS (W x D x H) 320 x 247 x 520 mm
LOADING CAPACITY (containers) 1 X TESABOX  40 or 2 X TESABOX  20
TOTAL CYCLE TIME (NF X30-503-1 standard) (1) 30 to 35 min
TOTAL CYCLE TIME in working conditions (2) 30 to 50 min.
LOADING CAPACITY (KG/CYCLE) 3,2 to 4,8 kg/cycle - Based on an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 4,8 to 8 kg/cycle - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste
TREATMENT CAPACITY (KG/H) (3) 4 to 6 kg/h - Based on an average waste density of 0,08 to 0,12kg/L for Healthcare Waste 6 to 10 kg/h - Based on an average waste density of 0,12 to 0,2kg/L for Lab/Humid/Liquid Waste
MAX QUANTITY OF LIQUID RECOMMENDED PER CYCLE (4) 12 L
EXTERNAL DIMENSIONS (w x d x h) 1300 x 895 x 1450 mm
NET WEIGHT 580 kg 
LOADING CHAMBER Stainless steel with PTFE coating
TREATMENT CHAMBER AISI 304L stainless steel
STEAM GENERATOR AISI 304L stainless steel (chamber) & Highly corrosion-resistant Hastelloy®
WATER SOFTENER Built-in
WATER BOOSTER PUMP AND AIR COMPRESSOR Built-in
WASTER SHREDDER Structure: AISI 304L stainless steel & Blades: High-strength steel
PIPING Stainless steel/PTFE flexible hosing
CHASSIS Painted steel
BODYWORK Composite material / Painted steel
CYCLE TRACEABILITY - THROUGH PRINTOUT Built-in
USB PORT Built-in
 ;                                   (1) 30-35min for test loads as per NF X30-503-1 standard. (2) Cycle times m vary based on the type of materials, waste density, humidity, quantity of liquids, etc. For loads with high liquid content, cycle time can be longer. Up to 50min depending on the waste density. (3) Based on an average cycle time of 45min. (40 min. of cycle + 5 min. unloading/loading time). (4) Quantity of liquids allowed might vary depending on application (urine bags, blood bags, food testing bags, ...). All the data given in this catalogue are non-binding and given as a guide only. Treatment capacities, cycle times and consumptions are given as mere examples and may vary depending on the type of waste, installation conditions, operator’s availability and skills. Consumption is calculated on the basis of a standard cycle of the machine. For consumption with cooling of the drain and / or the Virus + kit, please consult us.
 
WATER
Requirements Softened water (4-8°TH)
Consumption 10 liters / cycle
ELECTRICITY
Requirements 380-400 V III N, 50Hz/60Hz, 15 kW
Consumption 1,5 kW/h / cycle
DRAIN ø 32 mm internal (heat-resistant)  
STEAM/COMPRESSED AIR Produced by the integrated steam generator and air compressor; no external connection required.
STERIPLUSTM, TESASHREDTM and TESAXTRACTTM are Tesalys brands names.