The on-site solution to convert infectious medical waste into municipal trash in minutes!
STERISHRED® 250 is a modern compact on-site solution for treating infectious healthcare waste using a non-burn thermal process (steam sterilization) at 135°C. It simultaneously shreds and sterilizes biohazardous waste including sharps in minutes!
|AVERAGE LOAD CAPACITY (WEIGHT)||15 to 25 kg of waste per cycle*
*Based on waste density 0.12-0.2 kg/l
|TOTAL CYCLE TIME||40 to 45 min|
|PRODUCTION||20 to 35 kg/h*
*Based on an average waste density of 0,12 to 0,2 kg/l
|EXTERNAL DIMENSIONS (HxWxD)||1890 mm (2185 incl.pusher) x 1860 mm x 980 mm (h x w x d)|
|NET WEIGHT||1 750 kg|
|LOADING CHAMBER||Stainless steel|
|TREATMENT CHAMBER||316 L Stainless steel|
|STEAM GENERATOR||Stainless steel|
|WATER SOFTENER||Available as option|
|WATER BOOSTER PUMP AND AIR COMPRESSOR||Available as option|
|WASTE SHREDDER||AISI 304L stainless steel (structure) Hardox<sup>®</sup> hard steel (blades)|
|PIPING||Stainless steel/PTFE flexible hosing|
|CHASSIS||Powder coated steel|
|CYCLE TRACEABILITY||Built-in printer|
|WATER REQUIREMENTS||Water 4-8°TH, min 4.5 bar pressure|
|WATER CONSUMPTION||40 L /cycle. (15L machine + 25L steam generator)|
|ELECTRICITY REQUIREMENTS:||380-400 V III N, 50 Hz (other voltage/frequency available as option)
STERISHRED®250-30 (30 kW steam generator) 40 kW / average consumption 18 kWh
Inner 32 mm Ø (heat resistant, floor level)
|STEAM||Produced by the integrated steam generator, no external connection required|
Air compressor included
(2) Cycle times may vary based on the type of materials, waste density, humidity, quantity of liquids, etc.
For loads with high liquid content, cycle time can be longer. Up to 50min depending on the waste density.
3) Based on an average cycle time of 45min. (40 min. of cycle + 5 min. unloading/loading time).
All the data given in this catalogue are non-binding and given as a guide only. Treatment capacities, cycle times and consumptions are given as mere examples and may vary depending on the type of waste, installation conditions, operator’s availability and skills.
Consumption is calculated on the basis of a standard cycle of the machine.
For consumption with cooling of the drain and / or the Virus + kit, please consult us.